|
100
|
How do I enable the cross link support ( rectangular )
Dim oSurface as P
Dim var_Element as P
Dim var_Element1 as P
Dim var_Elements as P
Dim var_Link as P
Dim var_Link1 as P
Dim var_Link2 as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",0,76)
var_Element = var_Elements.Add("Element <sha ;;0>C",-76,32)
var_Element.AutoSize = .f.
var_Element.Height = 32
var_Element1 = var_Elements.Add("Element <sha ;;0>D",76,32)
var_Element1.AutoSize = .f.
var_Element1.Height = 32
var_Links = oSurface.Links
var_Link = var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
var_Link.StartPos = 1
var_Link.EndPos = 1
var_Link1 = var_Links.Add(oSurface.Elements.Item(2),oSurface.Elements.Item(1))
var_Link1.StartPos = 1
var_Link1.EndPos = 1
var_Links.Add(oSurface.Elements.Item(3),oSurface.Elements.Item(4))
var_Link2 = var_Links.Add(oSurface.Elements.Item(4),oSurface.Elements.Item(3))
var_Link2.StartPos = 0
var_Link2.EndPos = 2
oSurface.ShowLinks = 33 'exShowCrossLinksRect + exShowExtendedLinks
|
|
99
|
How do I show a link frmo bottom to top, or reverse, not from left to right
Dim oSurface as P
Dim var_Elements as P
Dim var_Link as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",0,64)
var_Links = oSurface.Links
var_Link = var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
var_Link.StartPos = 1
var_Link.EndPos = 1
|
|
98
|
What options to align the elements do I have if I use Arrange method
Dim h1 as
Dim h2 as
Dim h3 as
Dim oSurface as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.BeginUpdate()
oSurface.ShowGridLines = .t.
var_Elements = oSurface.Elements
h1 = var_Elements.Add("Top Alignment").ID
var_Elements.Add("Element")
var_Elements.Add("Element")
var_Elements.Add("Element")
h2 = var_Elements.Add("Center Alignment",,96).ID
var_Elements.Add("Element",,96)
var_Elements.Add("Element",,96)
var_Elements.Add("Element",,96)
h3 = var_Elements.Add("Bottom Alignment",,178).ID
var_Elements.Add("Element",,192)
var_Elements.Add("Element",,192)
var_Elements.Add("Element",,192)
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(3))
var_Links.Add(oSurface.Elements.Item(2),oSurface.Elements.Item(4))
var_Links.Add(oSurface.Elements.Item(2),oSurface.Elements.Item(3))
var_Links.Add(oSurface.Elements.Item(5),oSurface.Elements.Item(6))
var_Links.Add(oSurface.Elements.Item(5),oSurface.Elements.Item(7))
var_Links.Add(oSurface.Elements.Item(6),oSurface.Elements.Item(8))
var_Links.Add(oSurface.Elements.Item(6),oSurface.Elements.Item(7))
var_Links.Add(oSurface.Elements.Item(9),oSurface.Elements.Item(10))
var_Links.Add(oSurface.Elements.Item(9),oSurface.Elements.Item(11))
var_Links.Add(oSurface.Elements.Item(10),oSurface.Elements.Item(12))
var_Links.Add(oSurface.Elements.Item(10),oSurface.Elements.Item(11))
oSurface.Template = "DefArrange(3) = 0" // oSurface.DefArrange(3) = 0
oSurface.Arrange(h1)
oSurface.Template = "DefArrange(3) = 1" // oSurface.DefArrange(3) = 1
oSurface.Arrange(h2)
oSurface.Template = "DefArrange(3) = 2" // oSurface.DefArrange(3) = 2
oSurface.Arrange(h3)
oSurface.EndUpdate()
|
|
97
|
Is there an auto-arrange feature that will display the flow-chart centered and zoomed correctly after we are finished building it
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Element3 as local
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B").ID = "B"
var_Element1 = var_Elements.Add("Element B")
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C").ID = "C"
var_Element2 = var_Elements.Add("Element C")
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.ID = `C`"
' var_Elements.Add("Element D").ID = "D"
var_Element3 = var_Elements.Add("Element D")
oSurface.TemplateDef = "dim var_Element3"
oSurface.TemplateDef = var_Element3
oSurface.Template = "var_Element3.ID = `D`"
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("C"))
var_Links.Add(oSurface.Elements.Item("B"),oSurface.Elements.Item("D"))
var_Links.Add(oSurface.Elements.Item("B"),oSurface.Elements.Item("C"))
oSurface.Arrange()
|
|
96
|
Is it possible to change the distance between elements, when calling the Arrange method
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Element3 as local
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B").ID = "B"
var_Element1 = var_Elements.Add("Element B")
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C").ID = "C"
var_Element2 = var_Elements.Add("Element C")
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.ID = `C`"
' var_Elements.Add("Element D").ID = "D"
var_Element3 = var_Elements.Add("Element D")
oSurface.TemplateDef = "dim var_Element3"
oSurface.TemplateDef = var_Element3
oSurface.Template = "var_Element3.ID = `D`"
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("C"))
var_Links.Add(oSurface.Elements.Item("B"),oSurface.Elements.Item("D"))
var_Links.Add(oSurface.Elements.Item("B"),oSurface.Elements.Item("C"))
oSurface.Template = "DefArrange(1) = 0" // oSurface.DefArrange(1) = 0
oSurface.Template = "DefArrange(2) = 0" // oSurface.DefArrange(2) = 0
oSurface.Arrange()
|
|
95
|
How do I organize vertically the elements
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Element3 as local
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B").ID = "B"
var_Element1 = var_Elements.Add("Element B")
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C").ID = "C"
var_Element2 = var_Elements.Add("Element C")
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.ID = `C`"
' var_Elements.Add("Element D").ID = "D"
var_Element3 = var_Elements.Add("Element D")
oSurface.TemplateDef = "dim var_Element3"
oSurface.TemplateDef = var_Element3
oSurface.Template = "var_Element3.ID = `D`"
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("C"))
var_Links.Add(oSurface.Elements.Item("B"),oSurface.Elements.Item("D"))
var_Links.Add(oSurface.Elements.Item("B"),oSurface.Elements.Item("C"))
oSurface.ShowLinksType = 2
oSurface.Template = "DefArrange(0) = 1" // oSurface.DefArrange(0) = 1
oSurface.Arrange()
|
|
94
|
Is there a way to create a link which has the same start and end element
Dim oSurface as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element")
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(1))
|
|
93
|
How can I prevent hiding the item when an item with an outgoing link, is collapsed
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Item <sha ;;0>1").ID = 1
var_Element = var_Elements.Add("Item <sha ;;0>1")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = 1"
' var_Elements.Insert("Item <sha ;;0>2",1).ID = 2
var_Element1 = var_Elements.Insert("Item <sha ;;0>2",1)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = 2"
var_Element2 = var_Elements.Add("Item <sha ;;0>3")
var_Element2.ID = 3
var_Element2.X = 96
var_Element2.Y = 23
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(2),oSurface.Elements.Item(3))
oSurface.ShowLinksOnCollapse = .t.
|
|
92
|
How can I change the toolbar's visual appearance
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.Template = "Background(148) = 16777216" // oSurface.Background(148) = 16777216
oSurface.Template = "Background(149) = 16777215" // oSurface.Background(149) = 16777215
oSurface.Template = "Background(150) = 2631720" // oSurface.Background(150) = 2631720
oSurface.Template = "Background(153) = 23093344" // oSurface.Background(153) = 23093344
oSurface.Template = "Background(154) = 15790320" // oSurface.Background(154) = 15790320
oSurface.Template = "Background(155) = 27304096" // oSurface.Background(155) = 27304096
oSurface.Template = "Background(156) = 16777215" // oSurface.Background(156) = 16777215
|
|
91
|
How can I change the toolbar's background color
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(149) = 16777215" // oSurface.Background(149) = 16777215
|
|
90
|
How can I fit or ensure that all elements are in the control's client area
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Element A",-500,-500).BackColor = 65280
var_Element = var_Elements.Add("Element A",-500,-500)
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.BackColor = 65280"
' var_Elements.Add("Element B",500,500).BackColor = 255
var_Element1 = var_Elements.Add("Element B",500,500)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.BackColor = 255"
var_Elements.Add("Element C",48,24)
oSurface.FitToClient()
|
|
89
|
When I use the context menu to insert an image, the size seems to be fixed to 32 pixels. How can I control / change this
' The user creates at runtime a new element.
function CreateElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.Edit(0,"multiline,wordwrap")
' Element.AutoSize = True
oSurface = topparent:CONTROL_ACTIVEX1.activex
? "Call Edit(0) method of the Element object"
end function
' Occurs once the user right clicks the control.
function RClick as v ()
' SelElement(0).Edit(0,"multiline,wordwrap")
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Selection = oSurface.ElementFromPoint(-1,-1)
? "Call Edit(0) method of the SelElement(0) property"
end function
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.VisualAppearance.Add(3,"c:\exontrol\images\hot.ebn")
oSurface.Template = "Background(99) = 16777216" // oSurface.Background(99) = 16777216
oSurface.Template = "Background(102) = 33349056" // oSurface.Background(102) = 33349056
oSurface.Template = "Background(88) = 50331648" // oSurface.Background(88) = 50331648
oSurface.SelectObjectColor = 16571840
oSurface.Template = "HTMLPicture(`pic1`) = `c:\exontrol\images\zipdisk.gif`" // oSurface.HTMLPicture("pic1") = "c:\exontrol\images\zipdisk.gif"
oSurface.Template = "HTMLPicture(`pic2`) = `c:\exontrol\images\auction.gif`" // oSurface.HTMLPicture("pic2") = "c:\exontrol\images\auction.gif"
oSurface.Template = "HTMLPicture(`pic3`) = `c:\exontrol\images\colorize.gif`" // oSurface.HTMLPicture("pic3") = "c:\exontrol\images\colorize.gif"
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
var_Element1 = var_Elements.Add("Custom-size pictures:<br><img>pic1:24</img>,<img>pic2:48</img> ,... and so on.",96,48)
var_Element1.ID = "B"
var_Element1.CaptionSingleLine = .f.
var_Elements.Add("Element C",48,24)
oSurface.EditContextMenuItems = "Size[id=57680][edittype=515][border=0][min=16][max=128][freq=16][editwidth=-128][ticklabel=value = %i ? '<b>'+value : ( value = vmax ? '<fgcolor 808080><font ;6><b>'+value : ( value = vmin ? '<fgcolor 808080><font ;6><b>'+value : '' ) )],Insert[group=3](<img>pic1:32</img>[id=57763],<img>pic2:32</img>[id=57763],Others[id=1000](default[group=3](<img>pic3</img>[id=57763]),<font ;6>other sizes[sep],<img>pic3:16</img>[id=57763],<img>pic3:32</img>[id=57763],<img>pic3:64</img>[id=57763]))"
|
|
88
|
Can I add images to node while editing the node using the Edit method
' The user creates at runtime a new element.
function CreateElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.Edit(0,"multiline,wordwrap")
' Element.AutoSize = True
oSurface = topparent:CONTROL_ACTIVEX1.activex
? "Call Edit(0) method of the Element object"
end function
' Occurs once the user right clicks the control.
function RClick as v ()
' SelElement(0).Edit(0,"multiline,wordwrap")
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Selection = oSurface.ElementFromPoint(-1,-1)
? "Call Edit(0) method of the SelElement(0) property"
end function
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as P
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.Template = "Background(99) = 16777216" // oSurface.Background(99) = 16777216
oSurface.Template = "Background(102) = 16777471" // oSurface.Background(102) = 16777471
oSurface.SelectObjectStyle = -1
oSurface.SelectObjectColor = 16571840
oSurface.Template = "HTMLPicture(`pic1`) = `c:\exontrol\images\zipdisk.gif`" // oSurface.HTMLPicture("pic1") = "c:\exontrol\images\zipdisk.gif"
oSurface.Template = "HTMLPicture(`pic2`) = `c:\exontrol\images\auction.gif`" // oSurface.HTMLPicture("pic2") = "c:\exontrol\images\auction.gif"
oSurface.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
var_Element1 = var_Elements.Add("This is a node that displays pictures:<br><img>pic1:48</img>,<img>pic2:48</img> ,... and so on.",96,48)
var_Element1.ID = "B"
var_Element1.CaptionSingleLine = .f.
' var_Elements.Add("Element C",48,24).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,24)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
87
|
I am using the Edit method to edit the node, but still not able to display multiple lines. Is this possible
' The user creates at runtime a new element.
function CreateElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.Edit(0,"multiline,wordwrap")
' Element.AutoSize = True
oSurface = topparent:CONTROL_ACTIVEX1.activex
? "Call Edit(0) method of the Element object"
end function
' Occurs once the user right clicks the control.
function RClick as v ()
' SelElement(0).Edit(0,"multiline,wordwrap")
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Selection = oSurface.ElementFromPoint(-1,-1)
? "Call Edit(0) method of the SelElement(0) property"
end function
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as P
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.Template = "Background(99) = 16777216" // oSurface.Background(99) = 16777216
oSurface.Template = "Background(102) = 16777471" // oSurface.Background(102) = 16777471
oSurface.SelectObjectStyle = -1
oSurface.SelectObjectColor = 16571840
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
var_Element1 = var_Elements.Add("Right-<b>Click</b> the node to edit it.",96,48)
var_Element1.ID = "B"
var_Element1.CaptionSingleLine = .f.
' var_Elements.Add("Element C",48,24).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,24)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
86
|
How can I change the visual appearance of the edit's context menu
' The user creates at runtime a new element.
function CreateElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.Edit(0)
' Element.AutoSize = True
oSurface = topparent:CONTROL_ACTIVEX1.activex
? "Call Edit(0) method of the Element object"
end function
' Occurs once the user right clicks the control.
function RClick as v ()
' SelElement(0).Edit(0)
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Selection = oSurface.ElementFromPoint(-1,-1)
? "Call Edit(0) method of the SelElement(0) property"
end function
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.Template = "Background(99) = 16777216" // oSurface.Background(99) = 16777216
oSurface.Template = "Background(102) = 16777471" // oSurface.Background(102) = 16777471
oSurface.SelectObjectStyle = -1
oSurface.SelectObjectColor = 16571840
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Right-Click to edit this node",96,48).ID = "B"
var_Element1 = var_Elements.Add("Right-Click to edit this node",96,48)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,24).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,24)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
85
|
How can I edit the node once the user right-click the element
' The user creates at runtime a new element.
function CreateElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.Edit(0)
' Element.AutoSize = True
oSurface = topparent:CONTROL_ACTIVEX1.activex
? "Call Edit(0) method of the Element object"
end function
' Occurs once the user right clicks the control.
function RClick as v ()
' SelElement(0).Edit(0)
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Selection = oSurface.ElementFromPoint(-1,-1)
? "Call Edit(0) method of the SelElement(0) property"
end function
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,48).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,48)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,24).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,24)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
84
|
I wish to return the name that is displayed in the Element that I have selected
' Notifies your application that the control's selection has been changed.
function SelectionChanged as v ()
oSurface = topparent:CONTROL_ACTIVEX1.activex
? "The number of selected elements is: "
? oSurface.SelCount
? oSurface.SelElement(0).Caption
end function
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.HideSel = .f.
oSurface.SelectObjectColorInactive = oSurface.SelectObjectColor
oSurface.SelectObjectTextColorInactive = oSurface.SelectObjectTextColor
var_Elements = oSurface.Elements
' var_Elements.Add("Element 1").Selected = .t.
var_Element = var_Elements.Add("Element 1")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.Selected = True"
var_Element1 = var_Elements.Add("Element 2")
var_Element1.X = 32
var_Element1.Y = 32
|
|
83
|
Been playing with the surface control with the embedded ExGrid ActiveX...I can see most events coming through via the Surface control but I can't get the OnOLEStartDrag event to fire
' Occurs once an inside control fires an event.
function OleEvent as v (Element as OLE::Exontrol.Surface.1::IElement,Ev as OLE::Exontrol.Surface.1::IOleEvent)
' Ev.Param(1).Value = 2
' Ev.Param(0).Value.SetData("items to be carried")
oSurface = topparent:CONTROL_ACTIVEX1.activex
? Ev
end function
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
Dim var_Grid as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.BeginUpdate()
var_Elements = oSurface.Elements
var_Element = var_Elements.InsertControl("Exontrol.Grid")
var_Element.ElementFormat = "\"client\""
var_Grid = var_Element.Object
var_Grid.BeginUpdate()
var_Grid.OLEDropMode = 1
var_Grid.Columns.Add("Default")
var_Grid.Items.AddItem("Click the item so it gets the focus")
var_Grid.EndUpdate()
oSurface.MoveCorner(17,0)
oSurface.EndUpdate()
|
|
82
|
Is it possible to assign/add a percent to
an element
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("Element A")
var_Element.ID = "A"
var_Element.CaptionAlign = 1
var_Element.AutoSize = .f.
var_Element.Height = 36
var_Element.Width = 96
var_Element.MinHeight = 36
var_Element.BackgroundExt = "none[(2,100%-15,100%-4,14)](left[50%,back=RGB(0,255,0),text=`15%`,align=0x11,pattern=6,frame])"
' var_Element.BackgroundExtValue(2,2) = "75%"
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.BackgroundExtValue(2,2) = `75%`"
' var_Element.BackgroundExtValue(2,4) = var_Element.BackgroundExtValue(2,2)
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.BackgroundExtValue(2,4) = BackgroundExtValue(2,2)"
|
|
81
|
How can I disable selecting the nodes/elements
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowSelectObject = 0
oSurface.AllowSelectNothing = .f.
oSurface.AllowSelectObjectRect = 0
oSurface.AllowToggleSelectKey = 0
|
|
80
|
How can I set my zooming levels on the control's toolbar
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ZoomLevels = "75,100,150,200"
oSurface.AllowLinkObjects = 0
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,12).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,12)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
79
|
How can I prevent zooming the surface
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowZoomSurface = 0
oSurface.AllowZoomWheelSurface = .f.
oSurface.ToolBarFormat = "-1,100"
|
|
78
|
How can I prevent adding the links
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowLinkObjects = 0
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,12).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,12)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
77
|
How can I fix all elements on the surface, so no moving or resizing is allowed
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowResizeObject = 0
oSurface.AllowMoveObject = 0
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,12).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,12)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
76
|
How can I link elements with no pressing the SHIFT key
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowInsertObject = .f.
oSurface.AllowLinkObjects = 1
oSurface.AllowMoveObject = 0
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,12).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,12)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
75
|
How can I disable creating the tree/hierarchies
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowInsertObject = .f.
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,12).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,12)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
|
|
74
|
How can I create new elements using simple clicks rather than double clicks
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowCreateObject = 1
|
|
73
|
How can I disable creating new elements at runtime
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowCreateObject = 0
|
|
72
|
I've noticed that the links cut the elements. Is it possible to show the links on the back
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
Dim var_Link as local
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ShowLinksType = 2
oSurface.ShowLinks = 1
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",48,12).BackColor = 16777215
var_Element2 = var_Elements.Add("Element C",48,12)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.BackColor = 16777215"
var_Links = oSurface.Links
' var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B")).Caption = "link"
var_Link = var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
oSurface.TemplateDef = "dim var_Link"
oSurface.TemplateDef = var_Link
oSurface.Template = "var_Link.Caption = `link`"
|
|
71
|
How can I show a picture on the link
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Elements as P
Dim var_Link as local
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "HTMLPicture(`pic1`) = `c:\exontrol\images\zipdisk.gif`" // oSurface.HTMLPicture("pic1") = "c:\exontrol\images\zipdisk.gif"
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
var_Links = oSurface.Links
' var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B")).Caption = "<img>pic1:24</img>"
var_Link = var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
oSurface.TemplateDef = "dim var_Link"
oSurface.TemplateDef = var_Link
oSurface.Template = "var_Link.Caption = `<img>pic1:24</img>`"
oSurface.ShowLinksType = 2
|
|
70
|
How can I show a caption on the link
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Elements as P
Dim var_Link as local
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
var_Links = oSurface.Links
' var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B")).Caption = "link"
var_Link = var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
oSurface.TemplateDef = "dim var_Link"
oSurface.TemplateDef = var_Link
oSurface.Template = "var_Link.Caption = `link`"
oSurface.ShowLinksType = 2
|
|
69
|
I am using EBN to show my arrows, the question is if I can make it bigger/larger
Dim oSurface as P
Dim var_Appearance as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Appearance = oSurface.VisualAppearance
var_Appearance.Add(1,"c:\exontrol\images\normal.ebn")
var_Appearance.Add(2,"CP:1 -2 -2 2 2")
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",96,-24).ID = "C"
var_Element2 = var_Elements.Add("Element C",96,-24)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.ID = `C`"
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("C"))
oSurface.LinksArrowColor = 33554432
|
|
68
|
Is it possible to show different type of arrows for links
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Element2 as local
Dim var_Elements as P
Dim var_Link as local
Dim var_Link1 as local
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
var_Elements = oSurface.Elements
' var_Elements.Add("Element A").ID = "A"
var_Element = var_Elements.Add("Element A")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `A`"
' var_Elements.Add("Element B",96,24).ID = "B"
var_Element1 = var_Elements.Add("Element B",96,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `B`"
' var_Elements.Add("Element C",96,-24).ID = "C"
var_Element2 = var_Elements.Add("Element C",96,-24)
oSurface.TemplateDef = "dim var_Element2"
oSurface.TemplateDef = var_Element2
oSurface.Template = "var_Element2.ID = `C`"
var_Links = oSurface.Links
' var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B")).ArrowColor = 255
var_Link = var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("B"))
oSurface.TemplateDef = "dim var_Link"
oSurface.TemplateDef = var_Link
oSurface.Template = "var_Link.ArrowColor = 255"
' var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("C")).ArrowColor = 16777216
var_Link1 = var_Links.Add(oSurface.Elements.Item("A"),oSurface.Elements.Item("C"))
oSurface.TemplateDef = "dim var_Link1"
oSurface.TemplateDef = var_Link1
oSurface.Template = "var_Link1.ArrowColor = 16777216"
|
|
67
|
How can I remove or clear the entire surface
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Elements.Add("element")
oSurface.Elements.Clear()
oSurface.Home()
|
|
66
|
How can I programmatically add a child element, or create a tree/hierarchy
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Root").ID = "rootID"
var_Element = var_Elements.Add("Root")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ID = `rootID`"
var_Elements.Insert("Child 1","rootID")
' var_Elements.Insert("Child 2","rootID").ID = "childID"
var_Element1 = var_Elements.Insert("Child 2","rootID")
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.ID = `childID`"
var_Elements.Insert("Child 3","rootID")
var_Elements.Insert("Sub-Child 1.2","childID")
var_Elements.Insert("Sub-Child 2.2","childID")
|
|
65
|
I've noticed that the element's background is transparent. Can I make it opaque
Dim oSurface as P
Dim var_Element as local
Dim var_Element1 as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("new 1").BackColor = 16777215
var_Element = var_Elements.Add("new 1")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.BackColor = 16777215"
' var_Elements.Add("new 1",24,24).BackColor = 15790320
var_Element1 = var_Elements.Add("new 1",24,24)
oSurface.TemplateDef = "dim var_Element1"
oSurface.TemplateDef = var_Element1
oSurface.Template = "var_Element1.BackColor = 15790320"
|
|
64
|
How can I add a resizable element
Dim oSurface as P
Dim var_Element as P
Dim var_Element1 as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("new 1")
var_Element.AutoSize = .f.
var_Element.Resizable = .t.
var_Element1 = var_Elements.Add("new 1",24,24)
var_Element1.AutoSize = .f.
var_Element1.Resizable = .t.
|
|
63
|
How can I programmatically add a new element
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("new 1")
var_Elements.Add("new 1",24,24)
|
|
62
|
Is it possible to assign a tooltip to an element
Dim oSurface as P
Dim var_Element as local
oSurface = topparent:CONTROL_ACTIVEX1.activex
' oSurface.Elements.Add("Element with a Tooltip").ToolTip = "This is a bit of text that should be displayed when cursor hovers the element."
var_Element = oSurface.Elements.Add("Element with a Tooltip")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.ToolTip = `This is a bit of text that should be displayed when cursor hovers the element.`"
|
|
61
|
How do I specify direct/straight link for all links
Dim oSurface as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ShowLinksType = 3 'exLinkStraight + exLinkDirect
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
|
|
60
|
How do I show a direct/straight link
Dim oSurface as P
Dim var_Elements as P
Dim var_Link as local
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
var_Links = oSurface.Links
' var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2)).ShowLinkType = 3 'exLinkStraight + exLinkDirect
var_Link = var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
oSurface.TemplateDef = "dim var_Link"
oSurface.TemplateDef = var_Link
oSurface.Template = "var_Link.ShowLinkType = 3"
|
|
59
|
How can I ensure that a specified element fits the surface's visible area
Dim oSurface as P
Dim var_Elements as P
Dim var_Pattern as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Pattern = var_Elements.Add("Element A",-100).Pattern
var_Pattern.Type = 6
var_Pattern.Color = 14737632
var_Elements.Add("Element B",2000).ScrollTo(17)
|
|
58
|
Is it possible to show a pattern like ( not available ) over an element
Dim oSurface as P
Dim var_Elements as P
Dim var_Pattern as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Pattern = var_Elements.Add("Element+Pattern",-100).Pattern
var_Pattern.Type = 6
var_Pattern.Color = 14737632
var_Elements.Add("Element",100)
|
|
57
|
How can I specify a different overview color for the element
Dim oSurface as P
Dim var_Element as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
' var_Elements.Add("Element+A",-100).OverviewColor = 255
var_Element = var_Elements.Add("Element+A",-100)
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.OverviewColor = 255"
var_Elements.Add("Element+B",100)
oSurface.Template = "ScrollPos(True) = 512" // oSurface.ScrollPos(.t.) = 512
|
|
56
|
I've noticed that some lines are shown on the border, how can I get ride of them
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element+A",-100)
var_Elements.Add("Element+B",100)
oSurface.Template = "ScrollPos(True) = 512" // oSurface.ScrollPos(.t.) = 512
oSurface.OverviewColor = -1
|
|
55
|
How can I handle clicking an icon or a picture
' The uses clicks a part of the element that shows the had cursor.
function HandCursorClick as v (Element as OLE::Exontrol.Surface.1::IElement,Hit as OLE::Exontrol.Surface.1::ShowHandCursorOnEnum,Key as A)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? Key
end function
Dim oSurface as P
Dim var_Element as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
oSurface.Template = "HTMLPicture(`pic1`) = `c:\exontrol\images\zipdisk.gif`" // oSurface.HTMLPicture("pic1") = "c:\exontrol\images\zipdisk.gif"
oSurface.Template = "HTMLPicture(`pic2`) = `c:\exontrol\images\auction.gif`" // oSurface.HTMLPicture("pic2") = "c:\exontrol\images\auction.gif"
var_Element = oSurface.Elements.Add("Caption")
var_Element.Pictures = "1,2/pic1/pic2"
var_Element.PicturesAlign = 33
var_Element.ShowHandCursorOn = 771 'exShowHandCursorExtraPictures + exShowHandCursorPictures + exShowHandCursorIcon + exShowHandCursorPicture
var_Element.CaptionAlign = 1
|
|
54
|
How can I display a picture
Dim oSurface as P
Dim var_Element as local
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "HTMLPicture(`pic1`) = `c:\exontrol\images\zipdisk.gif`" // oSurface.HTMLPicture("pic1") = "c:\exontrol\images\zipdisk.gif"
oSurface.Template = "HTMLPicture(`pic2`) = `c:\exontrol\images\auction.gif`" // oSurface.HTMLPicture("pic2") = "c:\exontrol\images\auction.gif"
' oSurface.Elements.Add("Element").Pictures = "pic1/pic2"
var_Element = oSurface.Elements.Add("Element")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.Pictures = `pic1/pic2`"
|
|
53
|
How can I display a picture
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "HTMLPicture(`pic1`) = `c:\exontrol\images\zipdisk.gif`" // oSurface.HTMLPicture("pic1") = "c:\exontrol\images\zipdisk.gif"
oSurface.Template = "HTMLPicture(`pic2`) = `c:\exontrol\images\auction.gif`" // oSurface.HTMLPicture("pic2") = "c:\exontrol\images\auction.gif"
oSurface.Elements.Add("Icon <img>pic1</img> or <img>pic2</img>")
|
|
52
|
How can I display an icon
Dim oSurface as P
Dim var_Element as local
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
' oSurface.Elements.Add("Element").Pictures = "0/1,2"
var_Element = oSurface.Elements.Add("Element")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.Pictures = `0/1,2`"
|
|
51
|
How can I display an icon
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
oSurface.Elements.Add("Icon <img>1</img> or <img>2</img>")
|
|
50
|
How can I prevent moving all descendent/outgoing elements when focused element is moved, more like a free move
Dim oSurface as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
oSurface.ShowLinksType = 3 'exLinkStraight + exLinkDirect
oSurface.AllowMoveDescendents = .f.
|
|
49
|
How can I display the +/- expand/collapse glyphs next to linked elements
Dim oSurface as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
oSurface.Elements.Item(1).Expanded = .f.
oSurface.ExpandLinkedElements = .t.
|
|
48
|
How can I host the Exontrol.Button inside the surface
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("ActiveX")
var_Element.Type = 2
var_Element.ElementFormat = "\"check\":18,\"client\""
var_Element.ShowCheckBox = .t.
var_Element.Control = "Exontrol.Button"
var_Element.Object.Caption = "<sha ;;0>button"
var_Element.Height = 32
var_Element.Width = 128
|
|
47
|
How can I host a Command button
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.InsertControl("Forms.CommandButton.1")
var_Element.ElementFormat = "\"check\":18,\"client\""
var_Element.Object.Caption = "command"
var_Element.ShowCheckBox = .t.
var_Element.Height = 48
var_Element.Width = 128
|
|
46
|
How can I handle the events of the inner ActiveX control
' Occurs once an inside control fires an event.
function OleEvent as v (Element as OLE::Exontrol.Surface.1::IElement,Ev as OLE::Exontrol.Surface.1::IOleEvent)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? Ev
end function
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.InsertControl("Forms.CommandButton.1")
var_Element.ElementFormat = "\"check\":18,\"client\""
var_Element.Object.Caption = "command"
var_Element.ShowCheckBox = .t.
var_Element.Height = 48
var_Element.Width = 128
|
|
45
|
How can I display a checkbox while my node hosts an ActiveX inside
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.InsertControl("Forms.CommandButton.1")
var_Element.ElementFormat = "\"check\":18,\"client\""
var_Element.Object.Caption = "command"
var_Element.ShowCheckBox = .t.
var_Element.Height = 48
var_Element.Width = 128
|
|
44
|
Is it possible to display a caption while the element hosts an ActiveX control
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.InsertControl("Forms.CommandButton.1")
var_Element.ElementFormat = "18;\"caption\"/\"client\""
var_Element.Object.Caption = "command"
var_Element.Caption = "Forms.CommandButton"
var_Element.CaptionAlign = 1
var_Element.Height = 48
var_Element.Width = 128
|
|
43
|
I host an ActiveX control but it does not cover the whole element. What can be done
Dim oSurface as P
Dim var_Element as P
Dim var_Element1 as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.InsertControl("Forms.CommandButton.1")
var_Element.ElementFormat = "\"client\""
var_Element.Object.Caption = "command"
var_Element.Height = 32
var_Element.Width = 128
var_Element1 = var_Elements.InsertControl("Forms.CommandButton.1")
var_Element1.ElementFormat = "\"client\""
var_Element1.Object.Caption = "command"
var_Element1.Height = 32
var_Element1.Width = 128
|
|
42
|
How can I host my ActiveX to the surface (method 2)
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.InsertControl("Forms.CommandButton.1")
var_Element.ElementFormat = "\"client\""
var_Element.Object.Caption = "command"
var_Element.Height = 32
var_Element.Width = 128
|
|
41
|
How can I host my ActiveX to the surface (method 1)
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("ActiveX")
var_Element.Type = 2
var_Element.ElementFormat = "\"client\""
var_Element.Control = "Forms.CommandButton.1"
var_Element.Object.Caption = "command"
var_Element.Height = 32
var_Element.Width = 128
|
|
40
|
How can I define the elements with a solid color on the background
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(88) = -1" // oSurface.Background(88) = -1
oSurface.Template = "Background(89) = -1" // oSurface.Background(89) = -1
oSurface.Template = "Background(90) = 255" // oSurface.Background(90) = 255
var_Elements = oSurface.Elements
var_Elements.Add("Node A")
var_Elements.Add("Node B",96,24)
|
|
39
|
Can I display the status to a different part of the element
Dim oSurface as P
Dim var_Element as local
oSurface = topparent:CONTROL_ACTIVEX1.activex
' oSurface.Elements.Add("Node").StatusAlign = 3
var_Element = oSurface.Elements.Add("Node")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.StatusAlign = 3"
|
|
38
|
How can I remove or hide the status part of the event
' A new element has been added to the surface.
function AddElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.StatusSize = 0
oSurface = topparent:CONTROL_ACTIVEX1.activex
end function
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(89) = -1" // oSurface.Background(89) = -1
var_Elements = oSurface.Elements
var_Elements.Add("Node A")
var_Elements.Add("Node B",96,24)
|
|
37
|
How can I change the visual appearance of the border for all elements
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.Template = "Background(88) = 16777216" // oSurface.Background(88) = 16777216
var_Elements = oSurface.Elements
var_Elements.Add("Element+A")
var_Elements.Add("Element+B",96,24)
|
|
36
|
How can I change the color of the border for all elements
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(88) = 65280" // oSurface.Background(88) = 65280
var_Elements = oSurface.Elements
var_Elements.Add("Element+A")
var_Elements.Add("Element+B",96,24)
|
|
35
|
How can I remove the border for all elements
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(88) = -1" // oSurface.Background(88) = -1
var_Elements = oSurface.Elements
var_Elements.Add("Element+A")
var_Elements.Add("Element+B",96,24)
|
|
34
|
How do I change the visual appearance the glpyh that shows when the element is added as a child
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.VisualAppearance.Add(2,"c:\exontrol\images\pushed.ebn")
oSurface.Template = "Background(86) = 16777216" // oSurface.Background(86) = 16777216
oSurface.Template = "Background(87) = 33554432" // oSurface.Background(87) = 33554432
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
|
|
33
|
Is it possible to change the color for the glpyh that shows when the element is added as a child
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(86) = 255" // oSurface.Background(86) = 255
oSurface.Template = "Background(87) = 255" // oSurface.Background(87) = 255
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
|
|
32
|
How can I change the color to show a valid link
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(83) = 65280" // oSurface.Background(83) = 65280
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
|
|
31
|
How can I change the color to show an invalid link
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(82) = 65280" // oSurface.Background(82) = 65280
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
|
|
30
|
How can I disable adding the elements as child of other nodes
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowInsertObject = .f.
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
|
|
29
|
How can I prevent moving the outgoing /descendents elements when moving an element
Dim oSurface as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ShowLinksType = 3 'exLinkStraight + exLinkDirect
oSurface.AllowMoveDescendents = .f.
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
|
|
28
|
How can I add programatically a link
Dim oSurface as P
Dim var_Elements as P
Dim var_Links as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
var_Links = oSurface.Links
var_Links.Add(oSurface.Elements.Item(1),oSurface.Elements.Item(2))
|
|
27
|
How do I prevent adding a link between elements
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowLinkObjects = 0
var_Elements = oSurface.Elements
var_Elements.Add("Element <sha ;;0>A")
var_Elements.Add("Element <sha ;;0>B",96,24)
|
|
26
|
How can I hide the 100% button ( zoom ) on the control's toolbar
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarFormat = "-1,100"
|
|
25
|
Is it possible to hide the Home button on the control's toolbar
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarFormat = "-1,101"
|
|
24
|
How can I hide the grid lines, including the axis
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ShowGridLines = .f.
oSurface.AxisStyle = -1
|
|
23
|
How can I hide the grid lines
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ShowGridLines = .f.
|
|
22
|
How can I clear the images shown on the control's toolbar
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarReplaceIcon(0,-1)
oSurface.ToolBarRefresh()
|
|
21
|
How can I replace the default icons shown on the control's toolbar
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarReplaceIcon(0,-1)
oSurface.ToolBarImages("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
|
|
20
|
How can I replace the default icons shown on the control's toolbar
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarImages("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
oSurface.Template = "ToolBarCaption(100) = `<img>3</img> aka1`" // oSurface.ToolBarCaption(100) = "<img>3</img> aka1"
|
|
19
|
How can I add an anchor element to the control's toolbar
' Occurs when an anchor element is clicked, on the control's toolbar.
function ToolBarAnchorClick as v (AnchorID as C,Options as C)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? AnchorID
end function
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarFormat = "-1,100,101,|,102"
oSurface.Template = "ToolBarCaption(102) = `<a a1>anchor</a>`" // oSurface.ToolBarCaption(102) = "<a a1>anchor</a>"
|
|
18
|
How can I add a button/image to the control's toolbar
' Occurs when the user clicks a button in the toolbar.
function ToolBarClick as v (ID as N,SelectedID as N)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? ID
end function
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarImages("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
oSurface.ToolBarFormat = "-1,100,101,102"
oSurface.Template = "ToolBarCaption(102) = `<img>3</img> new`" // oSurface.ToolBarCaption(102) = "<img>3</img> new"
|
|
17
|
How can I add a button to the control's toolbar
' Occurs when the user clicks a button in the toolbar.
function ToolBarClick as v (ID as N,SelectedID as N)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? ID
end function
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarFormat = "-1,100,101,102"
oSurface.Template = "ToolBarCaption(102) = `<sha ;;0>new`" // oSurface.ToolBarCaption(102) = "<sha ;;0>new"
|
|
16
|
How can I hide the control's toolbar
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.ToolBarVisible = .f.
|
|
15
|
How can I prevent selecting the elements
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.AllowSelectObject = 0
oSurface.AllowSelectObjectRect = 0
oSurface.AllowToggleSelectKey = 0
oSurface.Elements.Add("element")
|
|
14
|
How can I show the selected elements the same as the control has the focus
Dim oSurface as P
Dim var_Element as local
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.HideSel = .f.
oSurface.SelectObjectColorInactive = oSurface.SelectObjectColor
oSurface.SelectObjectTextColorInactive = oSurface.SelectObjectTextColor
' oSurface.Elements.Add("element").Selected = .t.
var_Element = oSurface.Elements.Add("element")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.Selected = True"
|
|
13
|
How can I show the selected elements with a different border
Dim oSurface as P
Dim var_Element as local
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.VisualAppearance.Add(1,"c:\exontrol\images\normal.ebn")
oSurface.HideSel = .f.
oSurface.SelectObjectStyle = 48
oSurface.SelectObjectColor = 16777216
oSurface.SelectObjectTextColor = 0
oSurface.SelectObjectColorInactive = oSurface.SelectObjectColor
oSurface.SelectObjectTextColorInactive = oSurface.SelectObjectTextColor
' oSurface.Elements.Add("element").Selected = .t.
var_Element = oSurface.Elements.Add("element")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.Selected = True"
|
|
12
|
How can I show the selected elements with a different background color
Dim oSurface as P
Dim var_Element as local
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.HideSel = .f.
oSurface.SelectObjectStyle = -1
oSurface.SelectObjectColor = 255
oSurface.SelectObjectTextColor = 16777215
oSurface.SelectObjectColorInactive = oSurface.SelectObjectColor
oSurface.SelectObjectTextColorInactive = oSurface.SelectObjectTextColor
' oSurface.Elements.Add("element").Selected = .t.
var_Element = oSurface.Elements.Add("element")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.Selected = True"
|
|
11
|
Is it possible to add an inner control on the surface
' Occurs once an inside control fires an event.
function OleEvent as v (Element as OLE::Exontrol.Surface.1::IElement,Ev as OLE::Exontrol.Surface.1::IOleEvent)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? Ev
end function
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("activex hosting")
var_Element.Type = 2
var_Element.Control = "Forms.CommandButton.1"
var_Element.Caption = "Command Button"
var_Element.Height = 64
var_Element.Width = 128
var_Element.ElementFormat = "14;\"caption\"/\"client\""
var_Element.CaptionAlign = 1
|
|
10
|
How can I make the control read-only
' Occurs when the control's layout is about to be changed.
function LayoutStartChanging as v (Operation as OLE::Exontrol.Surface.1::LayoutChangingEnum)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? Operation
oSurface.CancelLayoutChanging()
end function
Dim oSurface as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Elements.Add("new element")
|
|
9
|
How can I handle clicking a picture on the element
' The uses clicks a part of the element that shows the had cursor.
function HandCursorClick as v (Element as OLE::Exontrol.Surface.1::IElement,Hit as OLE::Exontrol.Surface.1::ShowHandCursorOnEnum,Key as A)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? Key
end function
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("new element")
var_Element.CaptionAlign = 2
var_Element.PicturesAlign = 0
var_Element.ShowHandCursorOn = 3335 'exShowHandCursorAnchorAll + exShowHandCursorPictures + exShowHandCursorIcon + exShowHandCursorPicture
var_Element.Pictures = "0,1,2"
|
|
8
|
How can I show the hand cursor when user hovers the element's image
' The uses clicks a part of the element that shows the had cursor.
function HandCursorClick as v (Element as OLE::Exontrol.Surface.1::IElement,Hit as OLE::Exontrol.Surface.1::ShowHandCursorOnEnum,Key as A)
oSurface = topparent:CONTROL_ACTIVEX1.activex
? Key
end function
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Images("gBJJgBAIDAAGAAEAAQhYAf8Pf4hh0QihCJo2AEZjQAjEZFEaIEaEEaAIAkcbk0olUrlktl0vmExmUzmk1m03nE5nU7nk9n0/oFBoVDolFo1HpFJpVLplNp1PqFRqVTqlVq1XrFZrVbrldr1fsFhsVjslls1ntFptVrtltt1vuFxuVzul1u13vF5vV7vl9v1/wGBwWDwmFw2HxGJxWLxmNx0xiFdyOTh8Tf9ZymXx+QytcyNgz8r0OblWjyWds+m0ka1Vf1ta1+r1mos2xrG2xeZ0+a0W0qOx3GO4NV3WeyvD2XJ5XL5nN51aiw+lfSj0gkUkAEllHanHI5j/cHg8EZf7w8vl8j4f/qfEZeB09/vjLAB30+kZQAP/P5/H6/yNAOAEAwCjMBwFAEDwJBMDwLBYAP2/8Hv8/gAGAD8LQs9w/nhDY/oygIA=")
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("new element")
var_Element.CaptionAlign = 2
var_Element.PicturesAlign = 0
var_Element.ShowHandCursorOn = 3335 'exShowHandCursorAnchorAll + exShowHandCursorPictures + exShowHandCursorIcon + exShowHandCursorPicture
var_Element.Pictures = "0,1,2"
|
|
7
|
How can I show the hand cursor when user hovers the element's checkbox
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("new element")
var_Element.CaptionAlign = 2
var_Element.CheckBoxAlign = 0
var_Element.ShowCheckBox = .t.
var_Element.ShowHandCursorOn = 3084 'exShowHandCursorAnchorAll + exShowHandCursorCheck
|
|
6
|
How can I remove the status part for all elements
' A new element has been added to the surface.
function AddElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.StatusSize = 0
oSurface = topparent:CONTROL_ACTIVEX1.activex
end function
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(89) = -1" // oSurface.Background(89) = -1
oSurface.Elements.Add("new element")
|
|
5
|
How can I remove the border for all elements
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.Template = "Background(88) = -1" // oSurface.Background(88) = -1
oSurface.Elements.Add("new element")
|
|
4
|
How do I edit the element's caption once the user creates the element
' The user creates at runtime a new element.
function CreateElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.Edit(0)
' Element.AutoSize = True
oSurface = topparent:CONTROL_ACTIVEX1.activex
end function
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
|
|
3
|
How can I align the element's checkbox next to the text
Dim oSurface as P
Dim var_Element as P
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.BeginUpdate()
var_Elements = oSurface.Elements
var_Element = var_Elements.Add("text")
var_Element.ShowCheckBox = .t.
var_Element.CaptionAlign = 2
var_Element.CheckBoxAlign = 0
oSurface.EndUpdate()
|
|
2
|
How can I assign a check-box to all elements
' A new element has been added to the surface.
function AddElement as v (Element as OLE::Exontrol.Surface.1::IElement)
' Element.ShowCheckBox = True
oSurface = topparent:CONTROL_ACTIVEX1.activex
end function
Dim oSurface as P
Dim var_Element as local
Dim var_Elements as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.BeginUpdate()
var_Elements = oSurface.Elements
var_Elements.Add("",-24,-24)
' var_Elements.Add("").Checked = 1
var_Element = var_Elements.Add("")
oSurface.TemplateDef = "dim var_Element"
oSurface.TemplateDef = var_Element
oSurface.Template = "var_Element.Checked = 1"
oSurface.Home()
oSurface.EndUpdate()
|
|
1
|
How do I change the control's background color
Dim oSurface as P
oSurface = topparent:CONTROL_ACTIVEX1.activex
oSurface.BackColor = 15790320
|